SURFACE PREPARATION: SHAKE WELL and DO NOT THIN. Apply to CLEAN AND DRY SURFACE at temperatures between 40-110 degrees Fahrenheit. Be sure all previous sealers are completely removed.

APPLICATION: Polished surfaces: 1. Pour several strips of NANO1000 onto a small area and rub into the surface in a circular motion using a clean rag or lambs wool pad. Continue rubbing until you feel resistance and repeat step 1. Repeat 3 times and allow the surface to dry for one hour. After drying there will be a residue which will appear streaky. Polish the residue off with a clean dry cloth or lambs wool buffing pad until residue is gone. Unpolished surfaces: Pour NANO1000 onto surface. Use a 3/8” nap paint roller or tufted push broom and press into surface. Repeat twice “wet on wet” to insure full saturation. For larger jobs use a clean pump sprayer to apply the material and immediately roll into the surface.

DRY TIME: Dry to the touch in 1 hour. Avoid stain exposure before full 7 day cure time.

CLEAN UP: Clean application tools with soap and water.

STORAGE AND SHELF LIFE: DO NOT FREEZE and use within one year of date of purchase.

COVERAGE PER GALLON: Concrete 200 sq.ft., Limestone 250 sq.ft., Marble Granite, Slate 400 sq.ft.

CARE AND MAINTENANCE: Clean surface with household liquid non-abrasive cleanser. Stubborn stains can be removed by pouring household bleach onto a piece of cloth or paper towel and placing it directly onto the affected area. Keep the cloth saturated for 30 minutes and repeat if necessary to remove the stain.